fiberglass self adhesive tape

excellent alkai-resistant, high tensile strength and deformation-resistance, perfect chemical stability.

Repair drywall, joint plaster boards and repair cracks and other damage in wall surface; used to EIFS system.

Mesh size: 5*5mm, 6*6mm, 2.85*2.85mm, 3.2*3.2mm

weight: 55g/m2---200g/m2

size width: 40mm---250mm

length: 10m---150m

Applications of fiberglass self-adhesive tape:

1. Wall must be clean and dry

2. Center and apply tape over the length of the joint, pressing firmly

3. Apply a generous first coat of compound over the and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape.

4. Let dry completely, then sand slightly.

5. Apply sufficient thin finishing coats to produce a smooth wall surface.

6. Cut or butted boards do not have a tapered edge. Therefore, special

Care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.